The design loop: the job, the section, read it, shape it, the wing, analyse, balance, make it; dashed arrows back from analyse to the section and from balance to the wing 1 · The job MISSION 2 · The section RESULTS · SEARCH · COMPARE 3 · Read it THE FOIL PAGE · RE · NCRIT 4 · Shape it OPTIMIZE · KULFAN CANVAS 5 · The wing PLANFORM · SECTIONS · TWIST 6 · Analyse WING ANALYSIS 7 · Balance TRIM 8 · Make it STEP · STL · DXF · DAT Not enough lift, or too much drag? The dashed arrows: change the section after analysis, or the wing after trim, and go round again.
The design loop
As a list
  1. The job: mass, speed, area, span and fluid on Mission give the operating points
  2. The section: Results, Search and Compare narrow the library to one name
  3. Read it: the foil page at your Reynolds number and Ncrit
  4. Shape it (optional): Optimize at the operating points, or edit on the Kulfan canvas
  5. The wing: planform, sections along the span, twist and dihedral
  6. Analyse: lift, drag and the first stall of the whole wing
  7. Balance: the wing and a stabiliser about the centre of gravity, on Trim
  8. Make it: STEP or STL of the wing, DXF or DAT of a section

Not enough lift, or too much drag? Analysis sends you back to the section; trim sends you back to the wing.

Start here

  • Getting started

    Find a section, read it at your Reynolds number, put it on a wing, analyse, export: the whole loop once.

  • Which tool?

    From the question you have to the page that answers it.

Sections

  • The foil page

    Polars, the chart views, Ncrit, the Reynolds list, the live run, the metrics and the downloads.

  • Reynolds number

    What Re is, how to work it out for your wing, and where to type it.

  • Ncrit

    What the transition setting does, which value to use, and what changing it moves.

  • Compare

    Overlaying sections, uploading a .dat, and the analysis options.

  • Mission and results

    Operating points, criteria weights, and how the selector scores a section.

  • Kulfan canvas

    CST shape parameters in one page: class exponents, weights, the leading edge, the trailing edge, and the exports.

  • Optimize

    The objective, the constraints, the solver, the result tiles, and why a run can return nothing.

  • Search

    Filters, families, and what the card figures mean.

Wings

  • Planform

    Half-span, chords, what "Sweep" means here, the derived angles, and the edge control points.

  • Sections along the span

    Choosing the root and tip sections, and how they blend.

  • Twist, dihedral and the tip

    The twist profile, dihedral, and the tip rondure.

  • Wing analysis

    AeroBuildup and VLM, what each costs, the stall-first readout, and the polar CSV.

  • Export

    STEP and STL, and what the export draws compared with the viewer.

Aircraft

  • Trim

    A wing and a stabiliser about a CG: trim angle, stabiliser setting, loads and static margin.

Agents and API

  • Connect your agent

    Claude, ChatGPT, Grok and Claude Code, driving the same tools against your account.

  • MCP tools

    Every tool the connector offers, with its inputs, generated from the server.

  • REST API

    Geometry and polars without a key.

  • For agents

    What to read and where, if you are a model reading this site.

  • API reference ↗

    The interactive endpoint reference.

  • Connectors ↗

    Set up a connector for your assistant.

Files and other tools

Reference