# Export

The wing is designed, analysed and balanced; the shop needs a file. Generate 3D Wing, at the bottom of the Design tab, builds the wing as a solid in CAD on the server and downloads it as STEP or STL, both halves, in millimetres. Three settings sit beside the button, and the file is the same loft the viewer has been showing you. The Wing Foil — Freeride exports with 30 loft sections and a 0.25 mm trailing edge.

**Recording: STEP for the mould, STL for the printer** (74 s, https://media.foil.tools/docs/wing-export.5cbd301bdc7b.mp4)

> Loft sections is how many stations the solid is lofted through between root and tip; thirty is plenty for a smooth freeride wing.
> TE thickness opens every station's trailing edge to at least this, for the cutter or the printer; 0 keeps each section's own.
> STEP is the exact B-rep loft, both halves as one closed solid in millimetres, for Fusion, Rhino, FreeCAD or SolidWorks.
> STL is the same solid as a triangle mesh, for slicers and mesh tools; for machining, take the STEP.

## Loft sections

![The Generate 3D Wing card at the bottom of the designer with the Loft sections, TE thickness and Format inputs ringed as one row, and the Generate button ringed.](https://media.foil.tools/docs/shots/wing-generate.0751a562fa2c.webp)

*Export is the last card on the page: three settings, then Generate. The button needs you signed in.*

How many stations the exporter lofts through between root and tip, 10 to 80, default 30. Each station is the blended section at that span position, scaled to its chord, placed on the edges you drew and rotated by the twist there. More stations follow a curved edge or a twist profile more closely and take longer to build; the full-scale aircraft in the library ask for 40. The viewer samples the same curves at 40 points.

## Trailing-edge thickness

A section's trailing edge as drawn is often a knife edge, which no cutter or printer can make. **TE thickness** opens every station's trailing edge to at least this value, up to 10 mm; 0 keeps each section's own edge. The reference designs carry a value for their size, 0.25 mm on the freeride foil. The viewer always shows the section as drawn, so the opened edge is the one place the file and the preview are meant to differ. A wing that pairs a sharp section with a blunt one is lofted with every edge opened slightly, because the loft cannot take both.

## STEP or STL

**STEP** is the exact lofted solid, for CAD: open it in Fusion 360, Rhino, FreeCAD, Onshape or SolidWorks and it is a body you can shell, split, cut moulds from or hollow for a spar. **STL** is the same solid as a triangle mesh, for slicers and mesh tools; take it for printing and the STEP for machining. Both hold both halves as one closed solid in millimetres. [File formats](/docs/file-formats) has what each file contains and which programs read it.

## Generate

Export needs a sign-in; the designer and the viewer do not. With a root section set, the button samples the four curves and sends them with the two sections, the loft count, the tip cap and the trailing-edge setting to the CAD sidecar, then downloads the result as `wing.step` or `wing.stl`. Building usually takes under 20 s; many sections or a rounded tip take longer. It stops at 90 s and says why. The file name does not carry the design name, so rename it as you save.

## The 3D preview

The viewer between the planform and the front view is the loft, built live from the same curves and sections the export uses. Seven camera views on keys 1 to 7, orthographic or perspective on O, the ground grid on G; Expand (E) docks the scalar controls over the render so you can work inside it. The shading buttons switch between the solid surface, the surface with its station rings and leading, trailing and quarter-chord lines, and the lines alone. The figures in the corner are the Derived Parameters.

![The 3D preview of the freeride wing with its toolbar ringed in three groups: the camera views, the surface and wire modes, and Persp, Grid and Expand.](https://media.foil.tools/docs/shots/wing-3d-preview.ed399984740e.webp)

*The 3D preview draws the loft the export writes. Its toolbar picks the view, the surface style, and the projection.*

## What the export draws

The viewer and the file are built from one description: the same 40-point sampling of the leading edge, trailing edge, dihedral and twist curves, the same two sets of CST parameters blended station by station, and the same tip cap. The cap's curve is one function, written once here and once in the CAD sidecar against a shared fixture, so the rounded tip you see is the one you machine. Where the two differ is by design and small: the file lofts through the station count you chose, and its trailing edges are opened to the thickness you set while the viewer draws the sections as they are.

## What this hands on

A STEP or STL of the whole wing, for the mould, the machine or the printer. For the section drawings a builder also asks for, the DXF and DAT downloads on each section's [foil page](/docs/foil-page) carry the same geometry at a stated chord; [File formats](/docs/file-formats) says how each is scaled.

## Controls on this page

| Control | What it does | Units |
| --- | --- | --- |
| Root | The section at the centreline. Type to search the library. With no tip section it is the whole wing; the viewer, the analysis and the export all draw from the same CST parameters. |  |
| Tip | The section at the tip. Leave it empty and the tip is the root section. Set it and every station between is blended from root to tip, in the viewer, the analysis and the export alike. |  |
| Re ≈ | The Reynolds number at this section, from its own chord, the operating speed and the fluid: Re = ρVc/μ. The tip, with a shorter chord, flies at a lower Re than the root; read each section's polars there. |  |
| Find → | Opens Mission with this slot's Reynolds number and the design CL already filled in, so the selector ranks sections for exactly this station. Its results offer "Apply to root" or "Apply to tip". |  |
| Optimize → | Opens Optimize starting from this slot's section at its Reynolds number and CL. The optimized shape comes back to the same slot. Needs a section in the slot first. |  |
| Operating conditions | Speed, fluid and design lift coefficient. They set the Re ≈ beside each section and what Find → and Optimize → ask for. Set them on Mission, or load a reference design, which carries its own. |  |
| Full span | Twice the half-span: the whole wing, tip to tip. Every length you type is for one half; the derived figures and the export are for both. | mm |
| Planform area | Both halves, integrated from the drawn leading and trailing edges at 40 stations, not from a trapezoid, so a curved outline counts. It is the S_ref the analysis reports. | m² |
| Aspect ratio | Full span squared over planform area. Higher means less induced drag for the same lift and a heavier root bending load; a glider is 20 and up, a freeride foil about 9. |  |
| Taper ratio | Tip chord over root chord, λ. About 0.35 comes closest to an elliptical span loading on a straight wing; below that the tip loads up and wants washout. |  |
| Sweep ¼c | The real quarter-chord sweep, measured off the planform the Sweep control built: the angle of the root-to-tip line through each chord's quarter point. This is the Λ a textbook or XFLR5 means. | deg |
| Sweep LE | The real leading-edge sweep: the angle of the straight line from the root leading edge to the tip leading edge. Larger than Λ¼c on a tapered wing, because the taper rakes the LE back. | deg |
| MAC | Mean aerodynamic chord, ∫c² dy / S over the half-wing. The reference length for Reynolds number at the wing level, for pitching moment and for the static margin. | mm |
| MAC spanwise | How far out from the centreline the mean aerodynamic chord sits. Where the half-wing's lift acts, near enough, so it is the arm the root bending moment works on. | mm |
| Wing loading | Weight over planform area, in pascals, at two fixed masses: 25 kg (a large RC model or a child on a foil) and 85 kg (an adult rider). Divide by ½ρV² for the lift coefficient the wing must fly at. | Pa |
| Target area | Scales the whole wing uniformly to this planform area: span and chords by the same factor, so aspect ratio, taper and the spline shape are unchanged. | m² |
| Target AR, hold area | Reaches this aspect ratio without changing the area: span grows by √(new/current) and every chord shrinks by the same factor. Exact for a curved outline, because it works on ratios. |  |
| Target AR, hold span | Reaches this aspect ratio without changing the span: every chord is scaled by current/new AR, so the area moves instead. |  |
| Standard series | Eight textbook planforms, each built at the span and aspect ratio you type. λ is taper ratio, AR aspect ratio, Λ the true quarter-chord sweep. Applying one changes the shape only; sections and operating point stay. |  |
| Reference designs | 15 complete wings at real sizes, from a surf foil to a bizjet. Loading one replaces everything: planform, sections, tip cap, export settings and the speed, fluid, CL and mass it was sized for. |  |
| LE and TE points | Add a point to the leading or trailing edge and drag it: the edge becomes a smooth curve through every point. Diamonds at root and tip set the end tangents; the root one is locked level so the two halves meet without a kink. |  |
| Half-span | Centreline to tip, for one half; the wing is mirrored about the root. 100 to 20,000 mm. Interior points keep their position in mm, so lengthen the span and they stay where they were. | mm |
| Root chord | Leading edge to trailing edge at the centreline, 10 to 5,000 mm. Sets the root section's Reynolds number and, with the tip chord, the taper ratio. | mm |
| Tip chord | Chord at the tip station, from 1 mm. A shorter tip means a lower Reynolds number there and, with no twist, a tip that loads up; the tip rondure's reach is a fraction of it. | mm |
| Sweep | Where the tip leading edge lands: tan(sweep) × half-span, minus a quarter of the taper. It is not the quarter-chord or the leading-edge sweep; the real angles it produces are under Derived Parameters. | deg |
| Dihedral | Angle of the tip above the root, -20 to 30°; negative is anhedral, the tips below the root. Sets the end of the front-view curve; points on that curve shape the path between. | deg |
| Tip twist | Geometric angle of the tip section relative to the root, -15 to 10°. Negative is washout: the tip flies at a lower angle and stalls after the root. The profile between is the twist curve. | deg |
| Bias | Where along the tip chord the rounded cap reaches furthest out, as a percentage from the leading edge, 5 to 95. Tangency to the edges limits the range; the readout says where the peak actually landed. | % chord |
| Reach | How far the cap extends past the tip station, as a percentage of half the tip chord: at 100 it reaches half a tip chord outboard; at 0 the tip is cut flat. The export carries the same cap. | % tip chord |
| Loft sections | How many stations the exporter lofts through between root and tip, 10 to 80, default 30. More follows a curved edge or a twist profile more closely and takes longer to build. |  |
| TE thickness | Opens every station's trailing edge to at least this, up to 10 mm, for a cutter or a printer that cannot make a knife edge. 0 keeps each section's own edge. The viewer always shows the section as drawn. | mm |
| Format | STEP is the exact lofted solid for CAD: shell it, split it, cut moulds from it. STL is the same solid as a triangle mesh for slicers and mesh tools. Both are in millimetres and hold both halves. |  |
| Generate 3D wing | Builds the solid in CAD on the server and downloads it, usually in under 20 s; it stops at 90 s and says why. Needs a sign-in and a root section. The file is the same loft the viewer shows. |  |
| 3D preview | The wing lofted live from the controls, both halves. Seven camera views on keys 1–7, Ortho or Persp on O, the ground grid on G, Expand on E. Drag to orbit, scroll to zoom, right-drag to pan. |  |
| Shading | Solid shows the surface as a painted composite would read. Solid+wire adds the station rings and the leading, trailing and quarter-chord lines over it. Wires shows only those, so the loft is visible through the wing. |  |
| Tail area | Stabiliser planform area, both sides together, in m². With the arm it sets the tail volume V_H; the cm² echo under the inputs is for foil builders, who size in cm². | m² |
| Tail arm | From the wing's quarter chord at its MAC to the stabiliser's quarter chord at its MAC, in mm. On a hydrofoil it is roughly the fuselage length. | mm |
| Tail AR | Stabiliser aspect ratio, span² over area. It sets how much lift the tail makes per degree. 3–5 is the band the card calls responsive without stalling before the wing. |  |
| CG | Centre of gravity as a fraction of the wing MAC, measured aft of the MAC leading edge. 0.25 is the wing's own aerodynamic centre; the static margin is how far the neutral point sits behind this. | × MAC |
| Tail volume | V_H = S_h · l_h / (S · MAC): the tail's area times its arm, scaled by the wing's. The one number that says how much authority the tail has; the card shows where it sits among the site's rigs. |  |
| Neutral point | Stick-fixed neutral point of wing plus tail, as a fraction of MAC and in mm: the CG position at which the rig would be neutrally stable. No fuselage; one moves it forward by about 0.05–0.10 MAC. |  |
| Static margin | Neutral point minus CG, as a percentage of MAC. Positive is statically stable: a nose-up disturbance makes a nose-down moment. Larger is steadier and needs more stabiliser trim to fly level. | % MAC |
| Estimate terms | The four factors the neutral point is built from: area ratio S_h/S, arm in chords l_h/MAC, the tail's lift slope over the wing's, and 1 − dε/dα, how much of the wing's downwash the tail sits in. |  |
